By Ian Carter
Following on from his significant other quantity on Bomber Command, the writer has assembled this year-by-year pictorial list which pulls upon the excellent archive held by means of the Imperial conflict Museum.
Read or Download Fighter Command 1939-45 PDF
Best aerospace books
Element & Scale Vol. 10: B-29 Superfortress (Part 1)
Hart relations: Hawker, Hart and Derivatives КНИГИ ;ВОЕННАЯ ИСТОРИЯ Hart relatives: Hawker, Hart and Derivatives (Aeroguide Classics 5)ByRaymond Laurence RimellPublisher:Linewrights198936 PagesISBN: 0946958343PDF26 MBQuite easily the Hawker Hart was once an excellent aeroplane, possibly the best to serve with the RAF within the peacetime years among the tip of 1 global conflict and the start of one other.
"This publication offers analytical and experimental tools and achievements in designing mechanical and mechatronic driveline structures. Examples contain a variety of energy dividing devices, together with symmetric and non-symmetric forms, in addition to open and lockable differentials, a variety of constrained slip differentials, no spins, and viscous clutches.
- Gee Bee Racers
- MiG-17 Fresco
- Secret Projects: Flying Saucer Aircraft
- Soviet Secret Projects: Fighters Since 1945, Vol. 2
- Aeroguide 26 - British Aerospace Harrier GR Mk. 5/ Mk. 7
- Air Transport Management: An international perspective
Extra info for Fighter Command 1939-45
4 • Flap, aileron, k ~ nacelle \\\~contact Fig. 11 Pitch and roll limitation diagram. ~ 2 m 0 0 m i 2 4 Aircraft t. / I1. :. , m z..... J ~F--. IF- T¢: 41 I el 42 AIRCRAFT LANDING GEAR DESIGN The following checks are suggested: I) Are the nose and main gear shock struts operating properly and the tires at normal inflation? 2) Is the nose gear shock strut fully compressed and the tire flat? Is the main gear shock strut fully compressed and the tire flat on one side, with static deflection and normal tire inflation on the other side?
During taxi tests, the normal and emergency brake systems are evaluated along with the skid control and steering system. Stop distances are compared with predictions and the aircraft is maneuvered to examine steering and damping with normal and emergency systems. Shimmy tests are also conducted. Demonstrations are conducted to show how towing, jacking, and mooring requirements have been met and, then, with the aircraft on jacks, a thorough 24 AIRCRAFT LANDING GEAR DESIGN inspection is made again of the landing gear and its proper functioning before first flight.
The report that accompanies these drawings shall indicate tire sizes, tire inflation pressures, design sink speeds, total air volume, and isothermal pressure in the extended, static, and compressed shock absorber positions at maximum takeoff gross weight, as well as the preliminary loads imposed upon the landing gear (USN). The shock strut efficiency obtained during the drop test shall not be less than 75% using the following formula: Efficiency, % - A LxS where A is the energy absorbed by the strut during its stroke (obtained by integrating the area beneath the strut Ioadstroke curve), L the maximum load (in pounds) obtained during the stroke, and S the maximum stroke obtained during the test (USAF/USN).